Stopping Angles

Select your product below


Plaster Stopping Angles have a perforated, recessed edge and are used where the edge of the building board is not exposed and where the fitting of a Stopping Bead would be difficult. The Stopping Angle is fixed to the sheet of building board with an adhesive or staples, with the finishing coats bonding into the building board and feathering up to the bead nib. Ideal for use around door jambs, however, in this application it is recommended that when using the building board up to 10mm thick, a P26 should be used so that the leg will slot into the door jamb as shown. Similarly, when using 13mm board, P27 should be used.

Spray adhesive designed for quick & easy installation of PVC sections. Simply spray on, tack off and install. PVC options provide flexibility and easy on-site adjustments.

Where can I buy Studco® products? Can I order directly from Studco?

You can place an order through one of our many resellers around the country. To find your nearest Studco distributor, please contact us.


When can I pick up from the Studco warehouse?

Order pick-ups are available between 7am – 4pm. Call us to check if your order is available for same day pick up.


What are the lead times for orders and how quickly can Studco fulfill my order?

Lead times may vary depending on location. Metro deliveries are available for next day or same day delivery. You can also pick up your order from your local Studco branch.

To find out about our lead times, please call us on 1300 255 255.


View more FAQs

Available Options

Product Code Product Information Width (mm) Length (mm) Approx Kg / Meter Sub Pack Stock Pack
PTSA06-30 Trim90® 6mm PVC Stopping Angle With Tear-Away 6 3000 0.07 1 50
PTSA10-30 Trim90® 10mm PVC Stopping Angle With Tear-Away 10 3000 0.07 1 50
PTSA13-30 Trim90® 13mm PVC Stopping Angle With Tear-Away 13 3000 0.08 1 50
PL095-30 Trim90® 80mm PVC Stopping Angle 80 3000 0.24 1 30


Other Products in this system



News letter in footer section

"(Required)" indicates required fields

This field is for validation purposes and should be left unchanged.